Canon POWERSHOT S2 IS User Manual page 41

1
Press the FUNC. button.
2 For still images, use • or • on the
omni selector to select _* (2592 x
1944).
For movies, select _* (640 x 480, 30 fps).
* The current setting is displayed.
3 Use the _ or I_ button on the omni
selector to select the resolution
you wish to set, then press the
SET button.
For movies, select the resolution and frame
rate, Number of shots remaining
(Only displayed when the resolution or
compression is selected.)
In the case of a movie clip, displays the
remaining shooting time (in seconds).
4 For still images, use the _ or I_
button on the omni selector to select
the compression you wish to set,
then press the SET button.
• You can shoot the image right after
selecting settings by pressing the shutter
button. This screen will appear again once
the movie is shot.
• Image file size (estimated) (p. 171)
• Types of memory card and number of shots remaining (p. 170)
_1 Press the FUNC. button and shoot the image.
L_] Changes movie resolution or frame rate (p. 67)