Canon POWERSHOT S2 IS User Manual page 131

Registering Sounds for Start-Up, Operations,
Self-Timer and the Shutter
• Use the _ or • button to select [_ (Record)
and press the SET button. Recording will start
and automatically stop when the time is
exceeded. Recording times for each item are
as follows:
Stad-up Sound: 1 sec. Operation Sound: 0.3 sec.
Self-timer Sound: 2 sec. Shutter Sound: 0.3 sec.
• Use the _ or • button to select [] (Register) and press the SET button.
5 Use the _ or I_ button to select [OK] and press the SET
button.
o_ se_ingi s e_se_ _e_ ane_M_ Game_se_i_g
_ Use the supplied software (ZoomBrowser EX/ImageBrowser) to add the
................... !efatt!t se!t!ngs !°!he !amera:
Data that can be Registered as My Camera Settings
My Camera settings should conform to the data types below. Memory
card images shot with this camera in any of the following formats can be
registered:
• Start-up Image
- Compression Method: JPEG (Baseline JPEG)
- Sampling Rate: 4:2:0 or 4:2:2
- Dimensions: (320 x 240 pixels)
• Start-up, Operation, Self-timer and Shutter Sounds
- Compression Method WAVE (monaural)
- Quantization Bits: 8 bit
- Sampling Frequency: 11,025 kHz or 8,000 kHz