Automated Playback (Slide Shows); Starting A Slide Show - Canon POWERSHOT S2 IS User Manual

Slide s how image settings are based onDPOF standards (p.141).
A selection of images or all the images on an memory card can be
displayed one- by-one in an automated slide show.
All Images Playsall imageson the memorycard in order.
Slide Show 1-3 Playsthe images selected for each show in order p. 119).
1
In the [rn--I(Play)] menu, select
[Slide Show] and press the SET
button,
• See Selecting Menus and Settings (p, 73).
• The Slide Show menu will display.
Use the • or • button to select
[Program] and select between [All
images] or one of [Show 1]-[Show 3]
with the < or I_ button,
• See from Step 3 of "Select images for the
Slide Show" (p. 119) to select images for
slide shows 1 to 3,
• Selecting [Reset] cancels the slideshow settings.
3 Use the • or • button to select [Start] and press the SET
button.
The slide show starts. The Slide Show menu will reappear after the
playback ends.
Pausing/Resuming a Slide Show
• Press the SET button to pause the show ( II appears). Press it again to
resume.
Slide Show Forward/Reverse
• User the '4 or • button to move to the previous or next image.
Stopping a Slide Show
• Press the MENU button during a slide show to stop it and display the
slide show menu,
118