Switching Between Built-In Flash Adjustment Settings - Canon POWERSHOT S2 IS User Manual

3
While pressing the shutter button halfway, press the []
button.
• The flash pre-fires to acquire the exposure value required for the subject,
and _ appears on the LCD monitor (or viewfinder).
• Each time you press the [] button, the flash exposure locks at the
required intensity for that composition.
4 Recompose the image and shoot.
bmton i _ uttons c an _ i_me _E
r_ FE Lock is not available while _) is displayed on the LCD monitor (or
_1_ viewfinder).
The built-in flash fires with automatic flash adjustments (except in the
M mode), but it is possible to set it so that it fires without any
adjustments.
1
Select [Flash Adjust] from the
[[_ (Rec.)] menu.
See Selecting Menus and Settings (p. 73).
2 Use the <i or I_ button to select [Auto] or [Manual] and
press the MENU button.