Canon POWERSHOT S2 IS User Manual page 124

Use the 4 or I_ button to select an
image you want to protect and
press the SET button,
• The [] icon appears on protected
images.
• To remove the protection, press the SET
button again (in protection mode).
• You can make the selection of images easier by toggling between single
image playback and index playback with the zoom lever.
• During index playback, turn the zoom bar toward _ to jump nine images
at a time. To select or deselect images, turn the zoom level toward O_ to
remove the Jump Bar (p. 45), then proceed.
122