Canon POWERSHOT S2 IS User Manual page 142

Z Connect the StereoNideo
Cable to the camera's AJV
OUT terminal,
• With your fingernail on the left edge
of the camera's DIGITAL terminal
cover, pull it forward to open it, and
plug the Stereo/Video Cable in all the way.
• Treat the connector area with great care when plugging and unplugging
the cable.
HjI
O Plug the other ends
of the StereoNideo
Cable into the
VIDEO IN and
AUDIO IN jacks on
the TV,
To the Video In Jack
Plug (Yellow)
To the Audio In Jack Plug (Lel_) (White)
To the Audio In Jack _" Plug (Right) (Red)
4 Turn on the TV and switch it to Video mode.
i
_l Power on the camera in Shooting mode or Playback
mode (p. 23).
• The image will appear on the TV. Shoot or play back images as usual,
• Press the DISR button when images are not being displayed on the TV
when shooting.
r_ • No image will appear on the LCD monitor (or viewfinder) when the
camera is connected to a TV monitor.
Refer to p. 80, for instructions regarding the video output signal.
140