List Of Messages - Canon POWERSHOT S2 IS User Manual

The following messages may appear on the LCD monitor (or viewfinder)
during shooting or playback.
Please refer to the Direct Print User Guide for the messages that display
during a printer connection.
Imageis being recordedto, or read from, memorycard. Playback mode is starting.
Resetting all the cameraand menu settings to default.
Youattemptedto shootor play back images withoutan memorycard installed.
Memorycard is write-protected.IP. 18)
You attemptedto shootan image without a memorycard installed.
Memorycard hasexperiencedan anomaly.
Men_ory card is fuji of Jmagee or soundsand no morecan be recordedor saved. Also, no more
in.age settings[such as slide showand printsettings)or sound memoscan be recorded.
The image could not be created becausethere is an image with the samename as the
directory that the camera is attempting to create, the highest possiblefile number hasalready
been reached,or recordedsound files have reachedthe maximum capacityof the memory
card. In the Sat up menu,please set [File No. Reset] to [On]. After you saveall the images or
sounds you wish to retainonto a computer,formatthe memorycard (p. 20). Please notethat
formattingwill erase all tile existing images and otherdata.
Battery charge is insufficientto operate the camera. Replacewith new AA-sizealkaline
batteries (p.16)or fullycharged CanonAA-size NiMH batteries(be sure to replaceall the
batteriesat the same time).
No images recorded on memory card.
You attemptedto play backan image largerthan 4992 x 3328 pixels or with a large data size.
You attemptedto play backan incompatibleJPEG image.