Sound-Only Recording (Sound Recorder) - Canon POWERSHOT S2 IS User Manual

Pia_ such i _a gesl _h_ !ii_ m patibie WAVE fO_ _t!i
e s_e wiii;;dis_iay.;inco m pati bl eso u_d flies ca_ be ;deieted
wi_ _is camera! ; ; ;
una mere _s _6_ p_ected im ages can _o_ _e;_ra_d (p
_, The voiume can be adjusted in the Set up menu (p. 79).
L_ _' If you set Mute to On in the Set up menu no sound is reproduced
however you can resume the sound and adjust the volume by
You can record sound only, without images, for up to two hours at one time
1 Select [Sound Recorder] from the [FD--] (Play)] menu, and
press the SET button.
See Selecting Menus and Settings (p, 73).
Use the 4 or I_ button to select
[0] (Record) from the Sound
Control Panel and press the SET
button,
• The recording starts and the elapsed time
is displayed. Available Recording Time
• Sound Mode Settings (p. 68)
• Press the SET button again to stop Sound Control Panel
recording.
Pressing the shutter button halfway, or pressing the movie button will also
stop recording.
L_ memory card, and the sound mode.
Recording stops when t_e memory card is full,
From the Playback mode, the Sound Control Panel can be displayed
116