Converter Settings - Canon POWERSHOT S2 IS User Manual

mode on the camera, the PhotoStitch software will not be able to
stitch the images together on the computer,
• To protect the conversion lens, hold the camera's lens with one
hand and screw the conversion lens onto the camera with the
other hand.
• Completely remove all dust and dirt from conversion lenses with a
• Once the lens adapter is screwed on the camera, it locks into
place, When removing the wide converter, the tele-converter or
the close-up lens, do so while firmly pressing on the lens adapter
with your hand to avoid damage to the lenses.
Set the camera appropriately after attaching the Wide Converter WC-
DC58A or the Tele-converter TC-DC58B (no setting is needed for the
500D Close-Up lens).
1 Select [Converter] from the [r_ (REC)] menu.
Use the ,4 or I_ button to select the attached converter.
Press the MENU button.
When Image Stabilizer is set to anything other than [Off], an icon appears
for the lens selected in Step 2 in place of the image stabilizer icon on the
LCD monitor (or viewfinder).
ng t_[N_n_]i
158