Canon POWERSHOT S2 IS User Manual page 146

0 Select images for printing.
Single Images Number of print copies
• When the print type (p. 145) is set to
[Standard] or [Both], select an image with the
or • button.
Press the SET button, specify the number of
copies to print with • or V, and press SET
again. (Up to 99 copies can be specified).
- When you press the JUMP button, the
Jump Bar is displayed to help with
searching (p. 46). Press the SET button after the MENU button to
select and deselect, and to remove the Jump Bar.
• When the print type is set to [Index] (p. 145),
choose an image using the _ or • button and
press the SET button to select and deselect. A
checkmark displays on selected images.
(p. 145).
- After changing to Index playback (nine-
image display) by turning the zoom lever to
the _ side, you can select images in the
same way (if you turn the zoom lever to the _ side again, the camera
jumps nine images at a time. Before selecting or deselecting, turn the
zoom lever to O_ to remove the Jump Bar).
All images on a memory card Number of print copies
• Select [Mark All] as in Step 2, and press the
SET button. To select one print of each image,
select [OK] with the _ or • button, and press
the SET button.
• To cancel print settings, select [Reset].
• After performing [Mark All] or [Reset], the print
quantity for the specified images can be
changed by the same procedure as for a singly selected image.
4 Press the MENU button.
The selection mode will turn off and the Print Order menu will reappear.
144