Switching Between The Built-In Flash Adjustment Settings - Canon PowerShot S50 User Manual

Switching between the Built-in
Flash Adjustment Settings
The flash fires with automatic flash adjustments (except in the
possible to set it so that it fires without any adjustments.
1
Select [Flash Adjust] from the [
See Selecting Menus and Settings (p. 36).
2
Select [Auto] or [Manual] and press the
Compensating the Flash Adjustment (+/- (Flash))
The flash adjustment can be changed when [Flash Adjust] is set to [Auto]. The
settings can be adjusted in 1/3-stop increments in the range of –2EV to +2EV. You
can enjoy flash photography with exposure adjustments with the combined use of
the camera's exposure compensation function.
1
Press the
2
Select (+/- (Flash)) using C or D on
the multicontroller.
3
Adjust the compensation using B or A
on the multicontroller.
You can shoot the image right after selecting
settings by pressing the shutter button. This
screen will appear again, once the image is shot.
4
Press the
5
Shoot the image.
/ / button.
/ / button.
mode), but it is
(Rec.)] menu.
button.
e.g. Flash Adjustment Settings
93