Installing The Dvd Or Cd-Rom Drive - Supero SC512 Chassis Series User Manual

5-6

Installing the DVD or CD-ROM Drive

HARD DRIVE
Flat head
6-32 x 5 mm
[0.197]
Round head
3 x 5 mm
[0.197]
Flat head
M5 x 12 mm [0.472]
Washer for M5
Replacing the DVD or CD-ROM
Thumb screw
6-32 x 5 mm [0.197]
1. Place the DVD-ROM or CD-ROM drive in the chassis above the hard drive.
2. Secure the drive with two screws. One screw is external. The other screw is
internal.
Round head
2.6 x 5 mm
[0.197]
Figure 5-7: Replace the DVD-ROM/CD-ROM Drive
Chapter 5: Chassis Setup and Maintenance
Replace these screws
5-7
DVD-ROM/CD-ROM
Drive
Hard Drive