Table of Contents
Advertisement
5-5
Installing the DVD-ROM Drive
The SC113M chassis includes one slim DVD-ROM drive.
Installing the DVD-ROM Drive
1.
Attach the backplate (A) to the rear of the DVD-ROM drive using the two
screws provided.
2.
Place the DVD-ROM drive in the the drive carrier (B).
Secure the DVD-ROM drive to the floor of the drive carrier using one screw
3.
(C) as illustrated.
4.
Secure the left side of the DVD-ROM drive by inserting screws (D) through
the drive carrier and into the DVD-ROM drive as shown.
5.
Repeat step 3 on the right side of the drive carrier, securing the DVD-ROM
drive to the carrier using the screws (E) as shown above.
6.
Secure the drive carrier to the chassis using the screw (F) as shown above.
7.
Carefully slide the DVD-ROM drive and carrier unit into the chassis.
Figure 5-4: Installing the DVD-ROM Drive
Chapter 5: Chassis Setup and Maintenance
A
1
D
1
5-5
C
1
E
1
6
1
2
1
F
1
B
1
Advertisement
Table of Contents
