Installing The Air Shroud - Supero SC512 Chassis Series User Manual

5-7

Installing the Air Shroud

The air shroud helps cool the chassis by directing heated air through the rear of
the chassis. When installing the air fan, be aware of the following:
•
The air shroud is designed to fit within the chassis. The sides of the air
shroud should remain straight in relation to the top. Do not fold or bend the
air shroud.
•
The air shroud has perforated tabs that can be removed if motherboard com-
ponents prevent proper air shroud installation. Do not remove a tab unless it
is necessary.
Incorrect
Figure 5-10: Installing the Air Shroud in the SC512 Chassis
Installing The Air Shroud
1. Confirm that the air shroud matches your chassis model.
2. Place the air shroud in the chassis. The shroud sets directly behind the sys-
tem fans. If necessary, remove some perforated tabs to ensure a snug fit.
Chapter 5: Chassis Setup and Maintenance
Incorrect
Figure 5-9: Air Shroud Placement
5-9
Correct
Perforated Tabs