Table of Contents
Advertisement
5-6
Removing and Installing the DVD or CD-ROM
Prior to installing the motherboard, the DVD or CD-ROM must be removed, then
reinstalled after the motherboard has been installed in the chassis.
Mounting Screws
Figure 5-6: I/O Removing the DVD or CD-ROM
Removing the DVD or CD-ROM Drive
1.
Locate and remove the screws holding the DVD-ROM in place, setting aside
the screws for later use.
2.
If necessary, disconnect any cables to the DVD-ROM and comport tray.
3.
Slide the DVD-ROM and comport tray toward the rear of the chassis.
4.
Lift the DVD-ROM and comport tray free from the chassis.
Installing the DVD or CD-ROM Drive
1.
Carefully slide the DVD or CD-ROM and comport tray into the opening in the
front of the chassis.
2.
Secure the drive with the screws previously set aside and reattach the wiring.
Chapter 5: Chassis Setup and Maintenance
4
5-7
Advertisement
Table of Contents
