5-6
HARD DRIVE
Round head
3 x 5 mm
[0.197]
Round head
M4 x 4 mm
M5 x 12 mm [0.472]
[0.157]
1. Place the DVD-ROM/CD-ROM drive in the chassis above the hard drive.
M5 to 6-32
2. Secure the drive with two screws. One screw is external. The other screw is
Installation Step 4: Replace the CD-ROM Drive
Flat head
6-32 x 5 mm
[0.197]
Round head
2.6 x 5 mm
[0.197]
Flat head
Washer for M5
Figure 5-5: Replace the DVD-ROM/CD-ROM Drive
Thumb screw
6-32 x 5 mm [0.197]
internal.
Chapter 5: Chassis Setup and Maintenance
Replace these screws
5-7
DVD-ROM/CD-ROM
Drive
Hard Drive