5-4
Installing Hard Drives
HARD DRIVE
Flat head
6-32 x 5 mm
[0.197]
Round head
3 x 5 mm
[0.197]
Flat head
M5 x 12 mm [0.472]
Washer for M5
Figure 5-2: Removing the CD-ROM Drive to Access the Hard Drive
Installing a Hard Drive
Before adding a hard drive, you must remove the DVD-ROM/CD-ROM drive.
1.
Open the chassis cover.
Thumb screw
2.
If you have not already done so, remove the fan tray. For more information on
6-32 x 5 mm [0.197]
removing the fan tray, see the Maintenance section located at the end of this
chapter.
3.
Remove the CD-ROM drive. To do this, remove the two screws holding the
drive in place. One screw is external. The other is internal.
Remove these screws
Round head
2.6 x 5 mm
[0.197]
Chapter 5: Chassis Setup and Maintenance
5-3
DVD-ROM/CD-ROM
Drive