Chassis Setup and Maintenance
5-1
Overview
This chapter covers the steps required to install components and perform mainte-
nance on the chassis. The only tool you will need to install components and perform
maintenance is a Phillips head and a flathead screwdriver. Print this page to use
as a reference while setting up your chassis.
5-2
Installation Procedures
Removing the Chassis Cover
Installing the Hard Drive
Installing the Motherboard (includes I/O Shield and Expansion Card Slot setup)
Installing the DVD or CD-ROM Drive
Installing the Air Shroud
General Maintenance
Systems Fans
Power Supply
!
!
Chapter 5
Certain motherboards and heatsinks may not be compatible
with this chassis. Before installation, review the motherboard
installation procedures in this chapter.
Review the warnings and precautions listed in the manual be-
fore setting up or servicing this chassis. These include infor-
mation in Chapter 2: System Safety and the warning/precau-
tions listed in the setup instructions.
Chapter 5: Chassis Setup and Maintenance
5-1