Fuser Drive And Contact Cam System Service Check - Lexmark Optra C710 Service Manual

5016-001

Fuser Drive and Contact Cam System Service Check

Error Code 993: Indicates the cam sensor has not been activated.
The sensor activates when the fuser drive motor turns the cam disk.
If the fuser drive motor does not turn on, or the drive parts are not
operating, go to A.
If the fuser drive motor turns and appears to be operating properly,
and the cam is turning, go to B.
If the fuser drive motor turns and appears to be operating properly,
and the cam is not turning, go to C.
Diagnostic Information
2-53