Lexmark Optra C710 Service Manual page 28

5016-001
Feature
Charging System Corona
Development
Fusing System
Operating
Temperature
Erase System
Image Transfer
System
PC Drum
Cleaning System Blade
Printer Memory
Interface
Internal
Solutions Ports
Printer Options
Internal Print
Servers
1-4
Service Manual
Description
Non-magnetic mono-component
Hot roll fuser 170 degree C
(Hot roll 30mm, backup roll 34mm)
• 10 - 35 degrees C (50 - 95 degrees F)
Light discharge (LED lamp)
• Intermediate transfer (primary)
• Transfer roller (secondary)
Photoconductor: OPC (organic photoconductor)
• 32MB SDRAM
Note: Some models may ship with more memory.
When a duplex unit is installed, 64MB is the
recommended minimum printer memory.
• Maximum usable memory: 384MB
• Base printer: parallel standard Centronics protocol
compliant with bidirectional IEEE 1284B.
• Network printer: Ethernet standard connection.
• Three ports for network adapters, tri-port adapters,
parallel port adapters or hard disk.
• Three memory slots.
• Optional paper drawer: drawer unit with two 250 sheet
trays installed underneath the printer.
• Duplex unit: provides two sided color or monochrome
printing.
• Hard disk: 2.5 inch hard disk to store fonts, forms, job
statistics and spooled jobs (4gt limit).
Internal print servers available to support the following
topologies:
• Ethernet 10BaseT and 10Base2.
• Ethernet 10/100Base TX.
• Token-Ring (connects the printer to a Token-Ring
network via DB9 or FJ45).