Lexmark Optra C710 Service Manual page 92

5016-001
Message
87 Fuser
Exhausted
88 Color Low
88 Color Cartridge
Empty
2-26
Service Manual
Status
This message indicates a
new fuser kit must be
installed. If you do not
have the fuser kit, order it
now.
This message indicates
the color print cartridge
indicated is nearing its
end of life or empty
condition. If you do not
have an appropriate extra
print cartridge, order it
now.
The printer has detected
the specified print
cartridge is completely out
of toner.
Action
Press to clear the
Go
message and continue
printing. The fuser
exhausted intervention
message is posted every
time the printer power is
turned on.
When a new fuser is
installed, you must reset the
fuser counter to zero. To
reset the fuser counter:
1. Turn the printer off.
2. Press and hold the
and buttons on
Return
the operator panel while
turning the printer on. The
Configuration Menu
displays on the operator
panel.
3. Press or
Menu>
until
Reset Fuser Count
appears on the second
line.
4. Press to reset the
Select
fuser counter to zero.
Press to clear the
Go
message and continue
printing. The
Supplies
status message displays
with the ,
Ready Power
, and
Saver Busy
messages, unless another
status message of higher
priority is posted, or until
you replace the print
cartridge.
You must install a new print
cartridge before you can
continue printing.
Select
<Menu
Waiting