Lexmark Optra C710 Service Manual page 90

5016-001
Message
61 Defective Disk
62 Disk Full
63 Unformatted
Disk
64
Disk not in Slot 3
2-24
Service Manual
Status
The hard disk installed in
your printer is defective.
There is not enough
space available to hold
the resources you want to
store on disk.
The hard disk installed in
your printer has not been
formatted. You must
format the disk before you
can download resources
to it.
If you place an optional
hard disk in slot 1 or 2, this
message appears on the
operator panel. The
optional hard disk must be
placed in slot 3 for the
printer to operate. If you
have another adapter in
slot 3, move it to slot 1 or
2 and place the hard disk
in slot 3.
Action
Press to clear the
Go
message and continue
printing. You must install a
different disk before you can
perform any disk functions.
Press to clear the
Go
message and continue
processing. Downloaded
fonts and macros not
previously stored in flash
memory or disk are deleted.
To reset the printer:
• Press or
Menu>
When the Job Menu is
displayed press
• Press or
Menu>
until Reset Printer
appears on the second
line.
• Press .
Select
Press to clear the
Go
message. If the error
message remains, the disk
may be defective and need
replacing.
To format the disk, select
Format Disk from the
Utilities Menu.
Refer to your Setup Guide
for information on installing
an optional hard disk in your
printer.
Note: Do not attempt to
remove or install the hard
disk with the printer power
on or the power cord
connected.
.
<Menu
.
Select
<Menu