Lexmark Optra C710 Service Manual page 89

5016-001
Message
56 Parallel Port x
Disabled
56 Serial x Port
Disabled
58 Too Many
Disks Installed
58 Too Many
Flash Options
Status
Data was sent to the
specified parallel port, but
the port has been disabled
from the parallel buffer
menu item.
Data was sent to the
specified serial port, but
the port has been disabled
from the serial buffer
menu item.
You have more than one
hard disk installed.
You have more than one
flash option installed.
Action
Press to clear the
Go
message. The printer
discards the data sent to the
parallel port.
To reset the printer:
• Press
Menu>
until the Job Menu is
displayed.
• Press
Menu>
until Reset Printer
appears on the second
line.
• Press
Select.
Press to clear the
Go
message. The printer
discards the data sent to the
serial port.
To reset the printer:
• Press
Menu>
until the Job Menu is
displayed.
• Press
Menu>
until Reset Printer
appears on the second
line.
• Press
Select.
Turn the printer off and
follow the instructions in
your Setup Guide for
installing an optional hard
disk.
Turn the printer off and
follow the instructions in
your Setup Guide for
installing and removing flash
memory.
Diagnostic Information
or
<Menu
or
<Menu
or
<Menu
or
<Menu
2-23