Lexmark Optra C710 Service Manual page 81

5016-001
Message
Load Manual
No Jobs Found
Retry?
Print Jobs on
Disk?
Status
You have sent a request
for a manual feed job to
the printer, and the printer
is ready for you to insert a
single sheet or envelope
into the multipurpose
feeder. The message
displays either the custom
media name defined using
the MarkVision utility, the
media size, or the media
size and type it is looking
for.
This attendance message
occurs if you have entered
a PIN (Personal
Identification Number) to
print or delete a
Confidential Print Job and
your PIN is not associated
with any Confidential Print
Job currently stored in the
printer.
Jobs that were spooled to
the optional hard disk
before the printer was last
turned off have not yet
printed.
Action
To clear the message, load
media of the requested size
and type in the multipurpose
feeder. Press
Select
to ignore the manual feed
request and print on media
already installed in one of
the paper sources. If the
printer finds a tray that has
media of the correct size
and type, it feeds media
from that tray. If the printer
cannot find a tray with the
correct media size and type,
it prints on whatever media
is installed in the default
paper source.
To cancel the print job.
• Press
Menu>
The Job Menu is
displayed.
• Press
Menu>
until Cancel Job appears
on the second line.
• Press
Select.
• Press to enter another
Go
PIN.
• Press
Return
exit the PIN entry
operation.
• Press to print the jobs.
Go
• Press
Return
delete the jobs from the
disk without printing
them.
Diagnostic Information
or Go
or .
<Menu
or
<Menu
or to
Stop
or to
Stop
2-15