Lexmark Optra C710 Service Manual page 103

5016-001
B Media tries to feed from MPT, 250 paper jam message may
display.
FRU
1 Media
2 Paper Transfer
Roller
Sheet Bypass
Paper Roller
3 Sheet Bypass
Paper Feed
Clutch (CL 2)
C Transparencies do not feed, or feed improperly from the MPT.
FRU
1 Transparencies
Action
Be sure the media meets specifications.
Check the sheet bypass paper feed roller and
paper transfer roller for contamination, wear or
anything that would cause the rollers to feed
improperly.
Be sure the rollers operate properly and repair as
necessary.
Check the bypass paper feed clutch for proper
operation and repair as necessary. Check the
voltages on CN12.
Pin # Voltage
Signal
1 (Brown) +5 V dc
2 (Red) KAMIARIO
3 (Orange) DGND
4 (Yellow) VP
5 (Blue) - SL4ON
All voltages are approximate values.
• If the voltage on pin 4 is incorrect, replace the
engine board.
• If the voltage on pin 5 is incorrect, replace the
bypass paper feed clutch.
Action
Be sure the transparencies meet specifications for
the 5016-001 printer and are designed for laser
printer applications.
Voltage Voltage
Clutch Clutch
Static Activated
+5 V dc +5 V dc
0 V dc +5 V dc
0 V dc 0 V dc
+24 V dc +24 V dc
+24 V dc 0 V dc
Diagnostic Information
2-37