Lexmark Optra C710 Service Manual page 84

5016-001
Message
37 Insufficient
Memory
Held Jobs may be
Lost. Go/Stop?
38 Memory Full
2-18
Service Manual
Status
The printer is unable to
perform the requested
Print and Hold operation
because the printer does
not have enough memory.
The printer is processing
the job, but the memory
used to store pages is full.
Action
• Press to clear the
Go
message. The printer
starts to free memory by
deleting the oldest held
job and continues
deleting held jobs until
enough memory has
been freed to process the
incoming job.
• Press to clear the
Stop
message. Incoming data
that was not stored is lost.
Press to clear the
Go
message and continue
printing. Some data may not
print or may not print
correctly.
Cancel the print job. Press
or . The Job
Menu> <Menu
Menu is displayed. Press
or
Menu> <Menu
Cancel Job appears on the
second line. Press
To reduce the complexity of
the job:
• Reduce the number of
graphics or images on a
page.
• Delete unnecessary
downloaded fonts or
macros.
• Change the Print Quality
setting.
Install additional printer
memory to avoid future
Memory Full errors.
until
.
Select