Sorting Copy Setting; User Settings (For Copy Mode) - Muratec Fax Machine Installation Manual

D. Sorting copy setting
Default setting: Non-Sort
You can select sort function.
1
Press , [Copy Set].
MENU
2
Select "D.Sort Setting" and then press [Enter].
3
Select desired function for default sort setting.
4
Press [Enter] to save the default setting.
Note: Press to return to standby.
RESET
Note: If you set the sort function to ON, the Sort
icon will appear on the .
LCD
E. User settings (for copy mode)
You can change the default of following settings:
Scan settings. (Document type priority and Image density priority)
Width of the separator line in combine or image repeat function.
Auto reset time.
Scanning resolution priority. (You can select 600 dpi or 400 dpi)
To access the machine setting mode:
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select desired setting you want to change, then
press [Enter].
4
Change the settings to your preference.
01. Copy scan setting
Default setting: Document type: Auto, Image density: Auto
You can change the priority mode of Document type and Image density.
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press
[Enter].
3
Select "01. Copy Scan Setting" and then
press [Enter].
4
If you want to change the priority mode of docu-
ment type, select "Doc. type" and then press
[Enter].
5
Select desired mode and then press [Enter] to
save the setting.
6
If you want to change the priority mode of
image density, select "Contrast" and then
press [Enter].
7
Select desired mode using the cursor key, and
then press [Enter] to save the setting.
8
Press [Exit] or to save the default set-
RESET
ting.
Note: Press to return to standby.
RESET
Copy settings
2.27