Initial Setting - Muratec Fax Machine Installation Manual

Installation

Initial setting

Clearing stored settings
Before initial setting, clear your machine's built-in user data memory. This ensures
the memory will hold only your settings.
Important: After you done the initial setting, do not clear the memory again
unless an authorized technician asks you to do so.
To clear the machine's memory:
1
Press , , 2. The
MENU * LCD
to clear the memory.
Note: If you don't want to clear the memory,
just press [Cancel].
2
If you do want to clear the memory, press
[Enter].
Entering initial settings
Important: If you press
RESET
standby mode (its normal condition). But it will keep the settings you
saved by pressing [Enter] as described in these instructions.
1
Press to change to Fax mode, if the machine is in Copy mode.
FAX
2
Press , [Fax Set],
MENU I
The shows the current calendar/clock setting, with a cursor appearing
LCD
under the first digit.
3
Use the numeric keypad to enter the correct
date and time, using a 24-hour format for the
time. For instance, to set 1:30
26, 2001, press 2 0 0 1 1 1 2 6 1 3 3 0.
Note: Your machine automatically inserts the
spaces and date-slash. All you have to
do is enter the digits.
To change a digit, press the cursor key to move the cursor. Then enter the cor-
rect digit.
10
now asks if you want
during initial settings, your machine returns to
, [Enter].
on November
PM
4
Press [Enter] to save the clock setting and continue the settings.
If you are setting up the North American version machine, proceed to next
step. Otherwise, skip to step 8.
5
The now asks if you want to set the calen-
LCD
dar/clock to automatically recognize daylight
saving time ( ).
DST
When the setting is On, your machine automat-
ically recognizes at 2 on the appropriate
DST AM
switchover Sundays each year.
When the setting is Off, no automatic change will occur.
6
Select On or Off using the cursor key.
7
Press [Enter] to save the setting and continue.
8
The now asks you to enter your fax number
LCD
as you want it to appear on other fax machines'
displays or printouts. The fax industry term for
this number is Subscriber .
ID
9
Use the numeric keypad to enter the fax num-
ber. To insert a dash, as shown here, press [ – ].
The number may contain up to 20 characters (numbers and dashes).
Note: If you make a mistake, press [Clear] to erase to the left.
To change just one number, move the cursor by cursor key. Press
[Clear] to erase the number. Then re-enter the fax number correctly.
10
Press [Enter] to save the number and continue.
11
The now asks you to set the type of dialing
LCD
needed for the machine, either tone or pulse.
12
Select the type of dialing using the cursor key.
13
Press [Enter] to save the setting and continue.