Muratec Fax Machine Installation Manual page 75

If an EasyDial call fails
If an EasyDial call fails, what happens next depends upon the kind of call it was.
If it was a fax call ...
... Your fax machine automatically redials the number according to the redial inter-
val you've set (see page 3.75). It keeps trying until either of the following occurs:
• It successfully reaches the other number
• It has attempted the number of redials programmed and has still not connected
(see "Changing redial settings," page 3.75).
If it was a regular phone call ...
... You'll have to redial manually:
1
Obtain a dial tone by either lifting the handset or pressing
2
Press [Redial].
Note: If the call fails and you used
MONITOR
hang up. Or if you've pressed
START
end it.
/ .
MONITOR CALL
/ to dial, press / to
CALL MONITOR CALL
to begin the transmission, press to
STOP
Advanced fax
3.23