Installing The Printing Supplies - Muratec Fax Machine Installation Manual

Installing the printing supplies

This machine prints incoming faxes and copies with a laser print engine. The engine
requires two types of printing supplies (sometimes also called consumables):
• The drum cartridge — It yields 74,000 normal letter- or A4-sized printouts.
By "normal," we're referring to the amount of text and/or graphics on each page.
This is based on an industry-standard test document.
• The toner bottle — It yields 11,000 "normal" letter- or A4-sized printouts.
Installing the drum cartridge
1
Unpack the new drum cartridge from its car-
ton. Then remove the seal from the cartridge.
2
Remove two pieces of tape and sponge (rear) from the drum cartridge.
Tapes
Seal
Sponge
3
Pull up the printer cover release and
open the printer cover.
Important: Never touch the elec-
trical contacts inside
the printer cover and
under the drum car-
tridge, as an
electrostatic discharge
may damage the
machine.
4
Shake the new drum cartridge hori-
zontally.
5
Align the green labels on both ends of
the new drum cartridge with the
green labels on the rails of the
machine and set it to the machine.
Installation
Electrical Contacts
5