Muratec Fax Machine Installation Manual page 68

Advanced fax
Printing a list of one-touch numbers
Forgot which number is stored in which one-touch key? Just print a list of your one-
touch numbers. The list includes each key's number, the Location
fax/telephone number and group number(s) you've stored in the key.
To print a list of one-touch numbers, press
One-touch fax dialing
To dial a fax call using a one-touch number:
1
Place the document and select resolution and contrast you require.
2
Toggle between transmission from the feeder or from memory if necessary, by
pressing
MEMORY TRANSMIT
3
Press the one-touch key in which you've stored the number.
One-touch phone dialing
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorized Muratec dealer to order an
optional handset.)
To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the handset
• Press / to use the monitor speaker
MONITOR CALL
2
Press the one-touch key in which you've stored the phone number.
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dialed by using the monitor speaker, pick up the handset to speak to
the person that answers.
Note: If the call fails, and you used
hang up.
3.16
(if any),
ID
, , [List].
MENU A
.
/ to dial, press
MONITOR CALL MONITOR
Using speed-dial numbers
Your fax machine can store up to 222 speed-dial numbers, designated by three-digit
identifier codes from 001 through 222.
You can not only enter, change and erase speed-dial numbers but also insert and
delete (delete and shift) them. Refer to the followings about the select function keys
you should use.
/ to
CALL