Copy Settings; Accessing The Copy Setting - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Copy settings

The copy settings allows you to customize various setting of copy setting to match your needs.

Accessing the copy setting

1
Press
[Program]

3 Copy Settings

2
Press
[Program]
1 Scan Parameters
3
Use
4
Change setting and press
table:
5
When you have finished, press
The underlined settings are the factory defaults.
1 Scan Parameters
2 Auto Reset Time
3 Copy Auto
4 Copy Protect
5 Sort Copy
6 Combine
10.6 M
ACHINE SETTINGS
, 2, 3.
MENU
No.23_
.
ENTER
No.231
or to search the item you want to set or change and press
ENTER
Doc. Type
You can choose one of the following for the default.
Text, Photo&Text, Photo
Contrast You can choose one of the following for the default.
Normal, Dark, Darkest, Light , Lightest
The machine returns to its initial condition automatically in a certain
period of time. You can change this time from 01 to 10 minutes.
03 min.
The machine automatically selects the recording paper size according to
the document size and enlargement/reduction rate. You can change it to
select the document size or enlargement/reduction rate automatically,
instead of the recording paper size.
Paper Size The paper will be selected automatically according to the
document size and copy ratio.
Reduction Copy ratio will be set automatically according to the paper
size and document size.
Doc. Size
Document size will be set automatically according to the
paper size and copy ratio.
Protects that the switching to the copy mode. See page 9.13.
Default setting of the sort copy.
ON The copies can be assembled as sets in sequential order.
OFF The copies will be
Default setting of the combine copy.
ON The machine always performs the combine copies.
OFF The machine does not make combine copies until you set it
manually.
. For details of each settings, refer to the following
to return to the standby mode.
RESET
printed on a page-by-page basis.
.
ENTER