Muratec Fax Machine Installation Manual page 66

Advanced fax
Changing a one-touch number
1
Press , , [Enter].
MENU A
The shows the one-touch number list.
LCD
2
Select the one-touch key you want to change a
previously stored number.
Note: You can select the one-touch key by
pressing that key on the control panel.
Note: You can press [Detail] to see the number which has been pro-
grammed in that one-touch key.
3
Press [Enter].
4
The previously stored number will be shown on
the . If you want to change this number,
LCD
press [Clear] to erase it and then enter
another number by using the numeric keypad.
The number can be up to 40 characters in
length.
5
When the number is as you want it, press [Enter] to store it.
6
If you want to change Location
number or Group number, enter them as
described in steps 7–15 on page 3.13.
Note: If you want to change the previously
entered one, press [Clear] to erase it.
Note: If you want to omit these settings,
go to step 7.
7
Press [Exit].
If you do want to change another one-touch number, go back to step 2.
If you do not want to change any more one-touch numbers, press
ish.
Use the autodialer labels in your fax's packaging to write down the stored
numbers for easy reference.
If you have entered the group number, you can also print out a directory of
your call groups. (See page 3.22.)
3.14
, Alternative
ID
RESET
** Helpful Tip **************************************************************
Pressing the one-touch key you want to change for a few seconds from the standby
mode, you can also change the one-touch number.
1
Keep pressing the one-touch key you want to
change until this
Note: Be careful not to press it too shortly.
The machine might perform a transmis-
sion.
2
Press [Enter].
3
Follow steps 4–7 in "Changing a one-touch number," left column on this page.
*****************************************************************************
Erasing a one-touch number
1
Press , , [Enter].
MENU A
The shows the one-touch number list.
LCD
2
Select the one-touch key which you want to erase.
Note: You can select the one-touch key by pressing that key on the control
panel.
Note: You can press [Detail] to see the number which has been pro-
grammed in that one-touch key.
3
Press [Erase]. The
Important: If you want to quit without eras-
ing the one-touch number you've
selected, press [Cancel]. The fax
will return to step 2.
4
Press [Erase] to erase the number.
to fin-
To erase another one-touch number, repeat steps 2–4.
Or press to return to standby mode.
RESET
appears:
LCD
shows (see right):
LCD