Table of Contents
Advertisement
• Group number — If you enter the group number, you can use the group
dial transmission function. (See "Using call group," in page 3.21.)
Note: If you wish to omit these settings, skip to step 16.
7
To enter the Location
:
ID
Select the "Location" and press [Enter].
8
Enter the Location
. (Regarding how to enter
ID
the character, see "Entering character" on page
1.15.) A number's Location
may be up to 24
ID
characters in length.
9
Press [Enter] to save the setting.
10
To enter the Alternative number:
Select the "Alt.No." and press [Enter].
11
Enter the alternative number using the
numeric keypad. The number can be up to 40
characters long.
12
Press [Enter] to save the setting.
13
To enter the Group number:
Select the "Group No." and press [Enter].
14
Use the numeric keypad to enter the call
groups for this number.
There are 32 possible call groups, numbered
1–32.
If you want to assign the number to more than one call group, insert a comma
after each number (except the last one) by pressing [Add].
Note: To assign this number to all 32 call groups, enter 0 (zero).
15
Press [Enter] to save the setting.
16
Press [Exit].
If you do want to enter another one-touch number, go back to step 2.
If you do not want to enter any more one-touch numbers, press
ish.
Use the autodialer labels in your fax's packaging to write down the stored
numbers for easy reference.
If you have entered the group number, you can also print out a directory of
your call groups. (See page 3.22.)
** Helpful Tip **************************************************************
Pressing an empty one-touch key from the standby mode, you can also enter a one-
touch number.
1
Press the empty one-touch key you want.
The
shows:
LCD
Note: If you do not want to enter the one-
touch number, press [No].
2
Press [Yes].
3
Follow steps 4–16 in "Entering a one-touch
number" on pages 3.12–3.13.
Note: If you press an empty one-touch key during broadcast or some other opera-
tions, the same display will appear. If you press [No], the machine will
return to the previous display. If you press [Yes], you can enter a one-touch
number and the machine will return to the standby mode.
You can also enter the fax number first and then select the one-touch key in which
you want to store the number.
1
Enter the fax number.
2
Press the empty one-touch key you want.
The
shows:
LCD
Note: If you do not want to enter the one-
touch number, press [No].
3
Press [Yes].
4
Follow steps 4–16 in "Entering a one-touch
number" on pages 3.12–3.13.
*****************************************************************************
to fin-
RESET
Advanced fax
3.13
Advertisement
Chapters
Table of Contents
