Muratec Fax Machine Installation Manual page 140

Common settings
H. Paper for list printing
When you print a list, your machine selects a paper automatically. However, you can
set the paper size or cassette for list printing, if you want.
Note: If the list can not be printed on one sheet with 100% ratio, it may be reduced
or rotated. If the paper you set is not in the cassette, it will be printed on
other size paper automatically.
1
Press , [Mach Set].
MENU
2
Select "H. Paper for List" using the cursor
key. Then press [Enter].
3
If you want to select certain paper size for list
printing, proceed to step 4.
If you want to select certain cassette, skip to
step 5.
4
Select the paper size using the cursor key and
press [Enter].
The machine will return to standby mode.
5
Press [Cassette].
6
Select the cassette using the cursor key and
press [Enter].
The machine will return to standby mode.
4.10
I. 2-Bin tray (Option)
When you have the optional 2-Bin tray, you can set where to exit a copied paper, a
received fax message and a list, on the upper tray or the lower tray.
Note: Papers except for the plain paper will be not stacked on the upper tray, even
if you set it to "Upper".
1
Press , [Mach Set].
MENU
2
Select "I. 2-Bin Tray Setting" using the cur-
sor key. Then press [Enter].
3
Select the item you want to change the setting
using the cursor key.
4
Select [Upper] or [Lower] as you want.
5
After you set all items you want to change,
press [Enter].
J. Printing of the machine setting list
1
Press , [Mach Set].
MENU
2
Select "J. Print Machine Setting" using the
cursor key. Then press [List].
K. Settings for printer controller (Option)
You can set the printer controller settings here. See the operating instructions of the
printer controller for details.