Installing The Toner Bottle - Muratec Fax Machine Installation Manual

Installation
6
Grasp the handles and push the drum
cartridge into the machine until it clicks.
7
Close the printer cover.

Installing the toner bottle

Note: Use ONLY the specified toner for this machine. Using any other toner could
result in trouble.
Note: Be careful not to drop the toner bottle from 1 m (about 40 inches) or more
height. It may cause damage to the toner bottle.
1
Open the toner bottle cover.
6
2
Sharply tap the new toner bottle against a
desk or other hard surface four or five
times. Then turn the toner bottle upside
down and tap it the same way again.
3
Shake the new toner bottle well and turn
it over lengthwise five times.
4
With the seal on the toner bottle facing up,
slowly peel off the seal as shown at right:
Note: Be careful, some toner may puff
out from the bottle.
5
With the "UP" marking on top, insert
and push the bottle up to the black
line on it.
6
Close the toner bottle cover.