Brother MFC-665CW User Manual page 150

Hide thumbs Also See for MFC-665CW:
Table of Contents

Advertisement

Copying
Difficulties
Cannot
make a copy.
Make sure that the Copy
key is illuminated.
(See Entering Copy mode
on page 92.)
Vertical streaks appear in copies.
If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanneron
page 146.)
Poor copy results when using the
Try using the scanner glass. (See Using the scanner glass on page !2.)
ADF.
Software
Difficulties
Cannot install software or print.
Run the Repair MFL-Pro
Suite program on the CD-ROM. This program wilI repair
and reinstall the software.
'Device Busy'
Make sure the machine is not showing an error message on the LCD.
PhotoCapture
Center ® Difficulties
®
9
Removable Disk does not work
1
Have you installed the Windows
2000 update.
If not, do the following:
properly.
1)
Unplug the USB cable.
2)
Install the Windows @) 2 000 update, and see the Quick Setup Guide. After
the installation the PC will be automatically
restarted.
3)
Wait about ! minute after you restart the PC, and then connect the USB
cable.
2
Take out the media card and put it back in again.
3
If you have tried 'Eject' from within Windows @), t ake out the media card before
you continue.
4
If an error message appears when you try to eject the media card, it means
the card is being accessed.
Wait a while and then try again.
5
If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Make sure you have put the media card into the media slot.
Cannot access Removable Disk
from Desktop icon.
Network
Difficulties
Cannot print over the Network.
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration
list (see Reports on page 88.) and check the current
Network settings printed in this list. Reconnect the LAN cable to the hub to verify
that the cabling and network connections
are good. If possible, try connecting the
machine to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active
for 2 seconds.
(If you are using a wireless connection (M FC-665CW only) or are having Network
problems, see the Network User's Guide on the CD-ROM for more information.)
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i!
134

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-440cw

Table of Contents