Managing Your Messages; Message Indicator; Playing Voice Messages; Erasing Incoming Messages - Brother MFC-665CW User Manual

Message Center (MFC-665CW only)
Managing your
messages
Message indicator
The @ light flashes if you have any new
messages waiting for you.
The LCD displays the total number of voice
and fax messages stored in the Message
Center memory.
Fax messages are only stored when Fax
Storage or Fax Preview is turned on. See
Advanced fax operations (Black & White
only) on page 76.
Playing voice messages
All messages are played in the order they
were recorded. The LCD shows the number
of the current message, the total number of
messages, and the time and date the
message was recorded.
Follow the steps below to listen to your voice
messages:
Press Play/Record.
The following commands are available
when playing messages:
* _4 (RWD) Repeats a message.
# _.l_l (FWD) Skips to the next message.
4) or _ Adjusts the volume.
Press Stop/Exit.
Erasing incoming messages
To erase voice messages individually
Press Play/Record.
The machine will sound a two second
beep and begins message playback.
Each message is preceded by one long
beep, and followed by two short beeps.
To erase a specific message, press
Erase immediately after the two short
beeps, or while the message is playing.
Do one of the following:
I Press 1 to erase the message.
m Press 2 to cancel.
Press Stop/Exit.
73