Delayed Batch Transmission (Black & White Only); Checking And Canceling Waiting Jobs; Setting Your Changes As A New Default - Brother MFC-665CW User Manual

Chapter 5
@
Enter the time you want the fax to be
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM.)
Press OK.
Note ...................................................................................
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
Delayed Batch Transmission
(Black & White only)
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
@ Press (Fax).
Press • or • to choose Batch TX.
Press OK.
Press • or • to choose On.
Press OK.
Press Stop/Exit.
Checking and canceling
waiting jobs
You can check which jobs are still waiting in
the memory to be sent and cancel a job. (If
there are no jobs, the LCD shows
No Jobs Waiting.)
@
@
@
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_! 44
O Press • or • to scroll through the jobs
and choose the job you want to cancel.
Press OK.
Do one of the following:
[] To cancel, press 1 to choose Yes.
If you want to cancel another job go
to step O.
[] To exit without canceling, press 2 to
choose No.
When you have finished, press
Stop/Exit.
Setting your changes as a
new default
You can save the fax settings for
Fax Resolution, Contrast,
Real Time Txand Scan Size you use
most often by setting them the default setting.
These settings will stay until you change
them again.
@
@
@
@
@
Press (Fax).
Press • or • to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
After changing the last setting, press •
or • to choose set. New Default..
PressOK.
Press 1 to choose Yes.
Press Stop/Exit.