Paging; Copy - Brother MFC-665CW User Manual

Advanced fax operations (Black & White only)
Paging
When you choose Paging, your machine
dials the pager number you have
programmed, and then dials your PIN
(Personal identification Number). This
activates your pager so you will know that you
have a fax message in the memory.
If you have set Paging, a backup copy of the
received fax will automatically be printed at
the machine.
Press Menu.
Press • or • to choose Fax.
Press OK.
Press • or • to choose
Advanced Fax Operation,
Press OK.
O Press • or • to choose
Fwd/Page/Store.
Press OK.
Press • or • to choose
Paging,
Press OK.
@
Enter your pager phone number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
18005551234##.
@
Do one of the following:
m If your pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
and then enter your fax number
followed by # #.
Press OK.
For example, press:
12345# RediallPause 180055
56789##
m If you do not need a PIN, press:
Redial/Pause, and then enter your
fax number followed by # #. Press
OK.
For example, press:
RediallPause 18005556789 # #
Press Stop/Exit.
Note ..................................................................................
• You cannot change a paging number or
PIN remotely.
• If Paging is turned on your machine
cannot receive a color fax unless the
sending machine converts it to black &
white.
• (MFC-665CW only)
If you want to be paged for voice
messages, make sure you pressed MC
on/off key to turn the Message Center on.
77