Handset Volume (Mfc-665Cw Only); Choosing The Handset Volume (For Volume Amplify) (Mfc-665Cw Only) - Brother MFC-665CW User Manual

Chapter 3
Note ...................................................................................
(MFC-665CW only)
You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM's) by pressing 41 < or i_ _).
Handset Volume (MFC-665CW
only)
Press Menu.
Press • or • to choose
General Setup.
Press OK.
Press • or • to choose Volume,
Press OK.
O Press • or • to choose Handset.
Press OK.
Press • or • to choose Low
or High,
Press OK.
Press Stop/Exit.
Note .......................................................................................
• You can adjust the handset volume any
time you are talking on the telephone.
There are two handset volume levels, Low
and High.
The default setting is Low.
• Press _) <1or I_ _q_!_ to adjust the volume
level. The LCD shows the setting you are
choosing. The new setting will remain until
you change it again.
Choosing the Handset
Volume (For Volume Amplify)
(MFC-665CW only)
Before you begin to use the machine, you
must decide if you need to set the handset
volume to Volume
Amplify On
for a user
who is hearing-impaired. The AMPLIFY
volume level complies with FCC standards.
Volume Amplify Off
This default setting is appropriate if none of
the users are hearing-impaired. During a
conversation, users can press 4) < or I_ _)_
on the control panel to adjust the volume to
sow or High. When the handset is replaced,
the handset volume will remain until you
change it again.
Volume Amplify On - Temporary
This setting is appropriate if some of the
users are hearing-impaired. During a
conversation, users can press ,d) < or I_ _/))
on the control panel to adjust the volume to
Low, High or Ai-_tpli fy.
When the handset is
replaced, the handset volume returns to the
default setting of Low.
Volume Amplify:On
-
Permanent
Choose Volume Amplify On -
Permanent if all of the users are hearing-
impaired. During a conversation, users can
press <l) < or I_ 4))) on the control panel to
adjust the volume to Low, High or Ampl i fy.
When the handset is replaced, the handset
volume returns to the default setting of
Amplify.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! ! 28