Select Standard Mode - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
ESC S
[Name]

Select standard mode

[Format] ASCII
Hex
Decimal
[Range] None
[Default] None
[Printers not featuring this command] TM-U230, TM-U220, TM-U210,
[Description] Switches from page mode to standard mode.
[Notes]
This command is enabled only in page mode. Page mode can be selected by ESC L.
When this command is executed, data in all the print areas is cleared, the print area set by ESC W returns
to the default value, but the value set by ESC T is maintained.
The following commands switch the settings for standard mode because these commands can be set
independently in standard mode and in page mode:
• ESC SP, ESC 2, ESC 3, ESC U, and FS S.
In standard mode, CAN, ESC FF, GS $, and GS \ are ignored.
The settings of ESC T and ESC W do not affect printing in standard mode.
The printer selects page mode with ESC L.
Standard mode is selected as the default.
[Model-dependent variations]
Paper roll Miscellaneous commands
Miscellaneous commands
ESC S
1B 53
27 83
None
ESC S
TM-U300A/B
E
XECUTING COMMAND
Ver. 10.01 p. 414