Select The Number Of Parts For The Thermal Head Energizing - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS ( K <Function 97>
[Name]

Select the number of parts for the thermal head energizing

[Format] ASCII
Hex
Decimal
p p
[Range] ( +
L
fn = 97
TM-T90,
m
[Default] = 0
[Description] Selects the number of parts for the thermal head energizing which
m
0, 48 Setting value of GS ( E Function 5 customize value (
1, 49 One-part energizing.
2, 50 Two-part energizing.
3, 51 Three-part energizing.
4, 52 Four-part energizing.
• The specification of each thermal head energizing differs, depending on the printer model. See model-
[Notes]
When the standard mode is selected, all the data in a line is printed with the same setting.
When the page mode is selected, all the data printed collectively by FF or ESC FF is printed with the same
setting.
[Model-dependent variations]
Paper roll Miscellaneous commands
GS ( K p p
L
02 00 61 m
1D 28 4B
2 0
29 40 75
×
p p
256) = 2 ( = 2,
H L H
TM-L90:0 ≤ ≤ 4, 48 ≤
m
Function
dependent variations.
TM-J2000/J2100, TM-L90, TM-T90,
fn m
H
97 m
= 0)
≤ 52
m
TM-P60
GS ( K
m specifies.
a
= 97).
Ver. 10.01 p. 449