Esc E - Epson TM-T88III Programming Manual

C O N F I D E N T I A L

ESC e

[Name] Print and reverse feed
[Format] ASCII
Hex
Decimal
TM-U230: 0 ≤
[Range]
TM-U220,
[Default] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60,
[Description] Prints the data in the print buffer and feeds
[Notes]
The amount of paper fed per line is based on the value set using the line spacing command (ESC 2 or
ESC 3).
The maximum paper feed amount depends on the printer model.
After printing, the print position moves to the beginning of the line. When a left margin is set, the
position of the left margin is the beginning of the line.
When this command is processed in page mode, only the print position moves, and the printer does not
perform actual printing.
This command is used to temporarily feed a specific line without changing the line spacing set by other
commands.
[Model-dependent variations]
Program Example for all printers
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&H1B);"e";CHR$(1);
PRINT #1, " CCCCC"; CHR$(&HA);
Paper roll Print commands
Print commands
n
lines
n
ESC e
n
1B 65
n
27 101
≤ 2
n
TM-U210: 0 ≤ ≤ 2
n
TM-U300A/B
TM-U230, TM-U220, TM-U210
ESC e
n
lines in the reverse direction.
Print Sample
AAAAACCCCC
BBBBB
Paper reverse fed one line after printing the
line of Bs
E
XECUTING COMMAND
Ver. 10.01 p. 90