Epson TM-T88III Programming Manual page 526

C O N F I D E N T I A L
TM-T90
In standard mode, the symbol which height exceeds 831 dots cannot be printed with this printer.
When printing PDF417 symbols, the printer starts actual printing after it reaches control speed for
the printing symbol. The paper must be fed 10 dots or less in this operation. This area is not
included in the vertical area transmitted by Function 082.
TM-L90
In standard mode, the symbol which height exceeds 831 dots cannot be printed with this printer.
When printing PDF417 symbols, the printer starts actual printing after it reaches control speed for
printing symbol. The paper must be fed 10 dots or less in this operation. This area is not included
in the vertical area transmitted by Function 082.
Paper roll Two-dimension code commands GS ( k Ver. 10.01 p. 526