Set The Reference Dot Density For Graphics - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS ( L p p m fn x y <Function 49>
L H
[Name]

Set the reference dot density for graphics.

[Format] ASCII
Hex
Decimal
p p
[Range] ( +
L
m = 48
fn
= 1, 49
x = 50, 51
y
= 50 [when
y = 51 [when
[Description] Sets the reference dot density to process the graphics data or bit image data. (dpi: dots per inch)
• [180 dpi × 180 dpi] is selected when
• [360 dpi × 360 dpi] is selected when
[Notes]
Note that certain settings for this function may affect the processing of the types of graphics and bit image
data listed in the table below.
Command: GS ( L and GS 8 L
Function no.
Function 67
Function 68
Function 83
Function 84
Function 112
Function 113
Paper roll Bit-image commands
GS ( L p p
L H
1D 28 4C 04 00
29 40 76 4 0
× 256) = 4 (
p p
= 4, = 0)
H L H
x
= 50]
x = 51]
Function name
Define the NV graphics data (raster format).
Define the NV graphics data (column format).
Define the download graphics data (raster format).
Define the download graphics data (column format).
Store the graphics data in the print buffer (raster format).
Store the graphics data in the print buffer (column format).
GS ( L GS 8 L
m fn x y
fn x y
30
fn x y
48
x y
= 50 and = 50
x y
= 51 and = 51
Ver. 10.01 p. 227