Transmit Paper Sensor Status - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
ESC v
[Name]

Transmit paper sensor status

[Format] ASCII
Hex
Decimal
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-P60, TM-U230,
[Description] Transmits the status of paper sensor(s) as 1 byte of data.
[Recommended Functions]
This command is supported only by some printer models but will not be supported by future models.
It is recommended to use
[Notes]
See GS r for details on status transmission.
The peripheral device status to be transmitted is as follows:
Bit
0, 1
2, 3
4
5, 6
7
[Model-dependent variations]
PRINT #1,CHR$(&h1B);"v";
Paper roll Status commands
Status commands
ESC v
1B 76
27 118
GS r 1
Binary Hex Decimal
00 00 0
11 03 3
00 00 0
11 0C 12
0 00 0
— — —
Off 00 0
TM-U300A/B, TM-U220
Program Example for all printers
ESC v
to check the status and GS r
Status
Roll paper near-end sensor: paper adequate.
Roll paper near-end sensor: paper near end.
Roll paper end sensor: paper present.
Roll paper end sensor: paper not present.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
obsolete command
obsolete command
for transmitting the paper sensor status.
E
XECUTING COMMAND
TM-U210
... how to use
this table
Ver. 10.01 p. 314