Print The Specified Nv Graphics Data - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS ( L p p m fn kc1 kc2 x y <Function 69>
L H
[Name]

Print the specified NV graphics data.

[Format] ASCII
Hex
Decimal
p p
[Range] ( +
L
m = 48
fn
= 69
32 ≤
kc1
32 ≤
kc2
TM-L90, TM-T90,TM-P60,
[Description] Prints the NV graphics data defined by the key codes (
• Users have the option of specifying horizontal (times
[Notes]
This function is used to print NV graphics data defined using Functions 67 and 68 of this command.
The printer only prints when NV graphics data corresponding to the specified key code is present.
Use this function when the printer enters the "beginning of the line" or "no data in print buffer" state
during standard mode.
Note that during page mode, printing operations will not be performed simply because image data has
been stored to the print buffer.
NV graphics data that exceeds the print area for one line will not be printed.
The scales for width and height of graphics are specified by (
270° clockwise-rotated graphics, the printer applies print area and dot density from [
feed,
Settings for text effect (bold, underline, orientation, etc. except for upside-down) and font size do not
affect the printing of the NV graphics data.
Feeds the paper the required distance when printing graphics data, regardless of line feed pitch settings
entered using the Set line feed command.
Paper roll Bit-image commands
GS ( L p p
L
1D 28 4C 06 00
29 40 76 6 0
× 256) = 6
p p
( = 6,
H L H
≤ 126
≤ 126
TM-J2000/J2100:
data.
y
: perpendicular to direction of paper feed].
GS ( L GS 8 L
m fn kc1 kc2 x
H
kc1 kc2 x
30 45
kc1 kc2 x
48 69
= 0)
x = 1, 2,
kc1
y
y
y
y = 1, 2
kc2
and ).
) × vertical (times
x y
) size settings for the selected
x y
, ). Therefore, in page mode with 90° or
x : direction of paper
Ver. 10.01 p. 246