Select Counter Print Mode - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS C 0
[Name]

Select counter print mode

[Format] ASCII
Hex
Decimal
0 ≤ ≤ 5
[Range] n
0 ≤
m
n
[Default] = 0,
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-P60, TM-U230, TM-U220, TM-U210,
[Description] Selects the print format for the serial number counter value (the number of printed digits and the print
position within the entire range of printed digits).
•
n
0
1-5
•
m
0, 48
1, 49
2, 50
[Recommended Functions]
This command is supported by some printer models but may not be supported by future models.
Future models will not support counter value.
Paper roll Counter printing commands
n m
GS C 0
n m
1D 43 30
n m
29 67 48
≤ 2, 48 ≤ ≤ 50
m
m
= 0
TM-U300A/B
n
specifies the number of digits to be printed.
Function
Prints the actual digits indicated by the number value.
n
Prints the last digits of the serial number.
m
specifies the layout within the specified range of printed digits, as follows:
Justification Layout within digits less than those specified
Align right Adds spaces to the left if the degits are less than those
specified.
Align right Adds 0 to the left if the degits are less than those specified.
Align left Adds spaces to the right if the degits are less than those
specified.
GS C 0
obsolete command
obsolete command
S
ETTING COMMAND
Ver. 10.01 p. 635