Select Kanji Character Style(S) - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
FS ( A
[Name]

Select Kanji character style(s)

[Printers not featuring this command] TM-T88III, TM-L60II, TM-P60, TM-U230, TM-U220,
[Description] Selects the multi-byte code character style.
• Function code
fn
48
•
[Notes]
This command is specified function by function code (
function.
Settings of this command affect multilingual (except Thai) characters and user-defined characters.
Settings of this command are effective until it is redefined, ESC @ is executed, the printer is reset, or the
power is turned off.
This command does not affect graphics, bit image, bar code, and two-dimension code.
Program Example
PRINT #1, CHR$(&h1C);"C";CHR$(0);
PRINT #1, CHR$(&h1C);"&";
PRINT #1, CHR$(&h1C);"(A";CHR$(2);CHR$(0);CHR$(48);CHR$(48);
PRINT #1, CHR$(&h34);CHR$(&h41);CHR$(&h3B);CHR$(&h7A);CHR$(&hA);
PRINT #1, CHR$(&h1C);"(A";CHR$(2);CHR$(0);CHR$(48);CHR$(50);
PRINT #1, CHR$(&h34);CHR$(&h41);CHR$(&h3B);CHR$(&h7A);CHR$(&hA);
PRINT #1, CHR$(&h1C);".";
Paper roll Kanji commands
Kanji commands
fn
specifies the function.
Function No. Function name
Function 48 Select Kanji character font
× 256) as the number of bytes after
p p p p
, specifies ( +
L H L H
The [parameters] are described in each function.
←
Select JIS code system
←
<Function 48>
←
<Function 48>
FS ( A
TM-U210,TM-U300A/B
p fn [parameters]
( and
H
fn ). Operation details are different depending on
Print Sample
S
ETTING COMMAND
).
Ver. 10.01 p. 492